Giỏ hàng

X-FLOW XIGA

Rated 4.5/5 based on 17 customer reviews
Product Line: XIGA
| |
Brand: UF Membranes

ATS Water technology introduce Xiga modules are based on hydrophilic hollow-fiber ultrafiltration membranes, composed of a PES/PVP blend. The membranes are operated in a dead-end mode and their high mechanical and chemical strength makes them suitable for a wide range of applications. The pressurized membrane modules with inside-out configuration are the industry’s choice for the removal of bacteria, viruses, suspended solids, and colloids.

 XIGA 64XIGA 55XIGA 40
Download Datasheet

 

 R-21 0.83UFCRX-300 0.83UFC
Download DatasheetDatasheet Pentair Xiga R21 083UFCDatasheet Pentair Xiga RX300 083UFC

FEATURES

  • Removal of microorganisms
    • 99.9999% (LOG6) reduction of bacteria (Pseudomonas diminuta)
    • 99.99% (LOG 4) reduction of viruses (MS2 coliphages) by mechanical means (EPA Est. No. 090374-NLD-001)
  • High membrane packing density: The industry’s smallest free volume in a membrane module
  • 100% integrity testing on individual fibers
  • Individual fiber repair
  • Very good antifouling behavior
  • Typical permeate quality:
    • SDI < 3
    • Turbidity < 0.1NTU
  • Excellent chemical resistance with a wide pH range (2 – 12) and high chlorine stability (maximum free chlorine 250 mg/l)
  • Typical high permeability: low energy consumption

CAPILLARY ULTRAFILTRATION

GENERAL

Xiga membrane modules can be operated at elevated presures for inline operations with RO, making use of GRP pressure vessels.

KEY SPECIFICATIONS

  • Temperature range: 0-40°C
  • Maximum operating pressure: 8 bar

FEATURES

  • Backwashable and CEB

HORIZONTAL DEAD-END

 

POTABLE WATER PRODUCTION

The Xiga membrane modules provide superior separation and effective rejection of viruses and chlorine resistant organisms such as Cryptosporidium and Giardia in the production of drinking water.

PROCESS WATER PRODUCTION

The Xiga membrane modules present an effective barrier to suspended solids and silt.
The permeate can be used directly as process water or, if salinity and dissolved solids are not within the required limits, be fed to a downstream RO system.

EFFLUENT POLISHING

The Xiga membrane modules are a reliable solution to meet the highest standards for turbidity and microbiology. The polished effluent is ready for unrestricted high-grade reuse.

 XIGA 64XIGA 55XIGA 40
Membrane surface area64 m²55 m²40 m²
Module dimensions (dxl)8.7” x 1.54m8.7” x 1.54m8” x 1.54m
Housing materialPVCPVCPVC
Membrane materialPES/PVPPES/PVPPES/PVP
Hydraulic membrane diamter  0.8mm0.8mm0.8mm
Nominal pore size20nm20nm20nm
pH-range  2-122-122-12
Chlorine resistance250,000ppm hours @ pH ≥10250,000ppm hours @ pH ≥10250,000ppm hours @ pH ≥10

 

To learn more about other X-Flow membrane modules and texture configurations, please click here.

In case Xiga modules are available and need to be replaced, contact ATS Water technology for advice on the best solution.

 

SPECIFICATIONS - LARGE SCALE

 R-21 0.83UFC

RX-300 0.83UFC

Membrane surface area4.3 m²0.08 m²
Module dimensions (dxl)3” x 1m1” x 0.3m
Housing materialPVC-CPVC
Membrane materialPES/PVPPES/PVP
Hydraulic membrane diamter    0.83mm0.83mm
Nominal pore size20nm20nm
pH-range    2-122-12
Chlorine resistance250,000ppm hours @ pH ≥10250,000ppm hours @ pH ≥10
 XIGA 64XIGA 55XIGA 40
Download Datasheet

 

 R-21 0.83UFCRX-300 0.83UFC
Download DatasheetDatasheet Pentair Xiga R21 083UFCDatasheet Pentair Xiga RX300 083UFC

Viewed Products