Phone
(028) 6258 5368SW 400 GR G2
The NanoH2O™ SW 400 GR G2 is engineered for seawater reverse osmosis (SWRO) plants demanding ultra-high permeate purity and strict energy efficiency. The element offers a stabilized salt rejection of 99.89% (99.75% minimum), 93% boron rejection, and a nominal permeate flow rate of 7,500 GPD (28.4 m3/day). Equipped with a 34-mil feed spacer, the SW 400 GR G2 enhances fouling resistance and maintains stable hydraulic performance during continuous operation.
PRODUCT FEATURES
- Incorporates Thin Film Nanocomposite (TFN) technology to elevate separation efficiency and permeate water purity.
- High salt rejection performance, delivering 99.89% stabilized rejection and 99.75% minimum rejection.
- 93% boron rejection, ensuring compliance with strict permeate boron limits in SWRO desalination trains.
- Nominal permeate flow rate of 7,500 GPD (28.4 m3/day), satisfying design capacity targets for seawater desalination plants.
- 34-mil feed spacer geometry improves resistance to colloidal and biological fouling while preserving steady-state flux.
- Combines high permeate purity with optimized energy efficiency, lowering power consumption without requiring elevated feed pressures.
- Satisfies stringent product water quality specifications while reducing overall capital expenditure (CAPEX) by minimizing the need for second-pass polishing.
- Certified to NSF/ANSI Standard 61 for municipal drinking water supply treatment systems.
SPECIFICATIONS
-
Permeate flow rate
7,500 GPD (28.4 m³/day)
-
Stabilized salt rejection
99.89%
-
Minimum salt rejection
99.75%
-
Stabilized boron rejection
93%
-
Active membrane area
400 ft² (37 m²)
-
Feed spacer thickness
34 mil
The NanoH2O™ SW 400 GR G2 RO membrane meets two critical demands in seawater desalination: producing high-purity permeate water and maintaining low specific energy consumption. With 99.89% salt rejection, 93% boron rejection, a 7,500 GPD flow rating, and a 34-mil feed spacer, this element serves SWRO plants requiring uncompromising product water quality.
1. Technical specifications of SW 400 GR G2 RO membranes
Reviewing technical specifications provides the baseline to evaluate if an element matches target RO system design parameters. The specifications below outline the core hydraulic performance, structural configuration, and separation capabilities of the industrial SW 400 GR G2 seawater RO membrane:
| SPECIFICATIONS | VALUE |
|---|---|
| Permeate flow rate | 7,500 GPD (28.4 m³/day) |
| Stabilized salt rejection | 99.89% |
| Minimum salt rejection | 99.75% |
| Stabilized boron rejection | 93% |
| Active membrane area | 400 ft² (37 m²) |
| Feed spacer thickness | 34 mil |
2. Operating specifications for SW 400 GR G2
Operating membrane elements within manufacturer-recommended limits is essential to sustain separation performance, prevent damage to the polyamide active layer, and extend service life. Below are the standard operating parameters for the SW 400 GR G2 SWRO membrane:
| SPECIFICATIONS | VALUE |
|---|---|
| Maximum applied pressure | 1,200 psi (82.7 bar) |
| Maximum chlorine concentration | < 0.1 ppm |
| Maximum operating temperature | 45°C (113°F) |
| pH range, continuous operation | 2 – 11 |
| pH range, cleaning | 1 – 13 |
| Maximum feed water turbidity | 1.0 NTU |
| Maximum feed water SDI₁₅ | 5.0 |
| Maximum feed flow | 75 gpm (17 m³/h) |
| Maximum pressure drop (ΔP) for each element | 15 psi (1.0 bar) |
3. Key design features of SW 400 GR G2
The SW 400 GR G2 delivers exceptional permeate quality combined with operational energy efficiency. It is purpose-built for single-pass SWRO trains where tight salt and boron rejection govern final product water compliance. Core features include:
- High salt rejection: The SW 400 GR G2 achieves 99.89% stabilized salt rejection (99.75% minimum), minimizing total dissolved solids (TDS) passage and producing ultra-pure permeate.
- High boron rejection: Delivers 93% boron rejection, providing reliable boron control in single-pass SWRO permeate streams without excessive chemical pH dosing.
- High permeate flow rate: Yields 7,500 GPD (28.4 m³/day), easily meeting hydraulic capacity requirements for municipal and industrial SWRO skids.
- 34-mil feed spacer: The wider 34-mil feed channel geometry improves cross-flow hydrodynamics, reduces spacer fouling, and maintains stable differential pressure (ΔP) across the vessel.
- Energy efficiency: Balancing high permeate purity with elevated water permeability reduces specific energy consumption (SEC) without requiring high-pressure feed pumps to operate at elevated pressures.
- 400 ft² active membrane area: Features 400 ft² (37 m²) of effective membrane surface area, fitting standard 8-inch SWRO pressure vessel layouts.
- Prestigious international certification: Certified to NSF/ANSI Standard 61 for potable water supply treatment systems.

4. Key operational advantages of SW 400 GR G2 membranes
Combining high rejection performance, optimized element geometry, and stable field operation enables the SW 400 GR G2 to address complex seawater desalination challenges. Notable advantages include:
- 99.89% stabilized salt rejection (99.75% minimum) to guarantee superior downstream permeate water quality.
- 93% boron rejection, ideal for facilities subject to strict agricultural irrigation or potable water boron limits.
- 7,500 GPD (28.4 m³/day) nominal permeate output to meet high-capacity plant design flow rates.
- 34-mil feed spacer design reduces axial pressure drop and resists fouling buildup during continuous duty.
- Superior energy efficiency cuts pumping power costs without requiring higher operating feed pressures.
- High single-pass permeate quality combined with reduced system capital expenditure (CAPEX) makes it ideal for SWRO designs balancing water purity targets and initial investment budgets.
- Certified to NSF/ANSI Standard 61 for municipal drinking water systems.
5. Important certifications for SW 400 GR G2
The SW 400 GR G2 element holds NSF/ANSI Standard 61 certification for drinking water system components. This standard governs materials, components, and products that contact potable water, providing engineers and project owners verified compliance for municipal water infrastructure.
NSF/ANSI Standard 61 certification is a foundational requirement when selecting RO membranes for municipal drinking water treatment plants where wetted material safety is strictly regulated.
6. Primary applications of SW 400 GR G2
The SW 400 GR G2 is engineered for seawater desalination plants demanding high permeate purity alongside tight operational efficiency. Based on its separation profile, the element is ideally suited for:
- Single-pass seawater reverse osmosis (SWRO) systems: Purpose-built for single-pass SWRO trains that must meet strict TDS and boron specifications in a single RO pass, eliminating or reducing the footprint of a secondary BWRO polishing pass.
7. Authorized supplier of genuine SW 400 GR G2 membranes
In seawater desalination projects, selecting the proper RO element requires assessing raw seawater salinity (TDS), temperature variations, design recovery rates, target permeate quality, and site operating conditions. Specifying the right element ensures the SWRO train achieves design capacity while maintaining steady operation and controlling specific energy consumption.
ATS Water Technology Co., Ltd. is an authorized distributor of genuine NanoH2O™ RO membranes in Vietnam, supplying the SW 400 GR G2 element for seawater desalination and industrial water treatment plants. Leveraging extensive field engineering experience, we assist clients in selecting membrane configurations tailored to site-specific feedwater chemistry and technical specifications.
For the SW 400 GR G2, ATS Water Technology provides engineering support to evaluate feedwater parameters, target permeate TDS/boron limits, and operating pressure profiles to verify element suitability. Along with supplying genuine elements, we provide full technical datasheets and system projection support for new SWRO plant designs, membrane replacements, or skid retrofits.
The SW 400 GR G2 RO membrane is a premier choice for seawater desalination facilities requiring high salt rejection, elevated boron removal, and low energy consumption. Contact ATS Water Technology today for application-specific engineering evaluation and technical consultation.
ATS WATER TECHNOLOGY CO., LTD
- Head office: 54/18 Bui Quang La, An Hoi Tay Ward, HCMC, Vietnam
- Branch office: 77 DHT10B, Dong Hung Thuan Ward, HCMC, Vietnam
- Consultation and support: (028) 6258 5368 – (028) 6291 9568
- Email: info@atswatertechnology.com
- Social media: Facebook | LinkedIn | YouTube
- Quick contact: Zalo Official | Telegram | WhatsApp
How can we help you?
Solution
Technology
Application